CAPEC-318: IP 'ID' Echoed Byte-Order Probe

Description
This OS fingerprinting probe tests to determine if the remote host echoes back the IP 'ID' value from the probe packet. An attacker sends a UDP datagram with an arbitrary IP 'ID' value to a closed port on the remote host to observe the manner in which this bit is echoed back in the ICMP error message. The identification field (ID) is typically utilized for reassembling a fragmented packet. Some operating systems or router firmware reverse the bit order of the ID field when echoing the IP Header portion of the original datagram within an ICMP error message.
Extended Description

During a UDP scan, a datagram is sent to a target port. If an 'ICMP Type 3 Port unreachable' error message is returned then the port is considered closed. Different types of ICMP messages can indicate a filtered port. UDP scanning is slower than TCP scanning. The protocol characteristics of UDP make port scanning inherently more difficult than with TCP, as well as dependent upon ICMP for accurate scanning. Due to ambiguities that can arise between open ports and filtered ports, UDP scanning results often require a high degree of interpretation and further testing to refine. In general, UDP scanning results are less reliable or accurate than TCP-based scanning.

Severity :

Low

Possibility :

Medium

Type :

Detailed
Relationships with other CAPECs

This table shows the other attack patterns and high level categories that are related to this attack pattern.

Skills required

This table shows the other attack patterns and high level categories that are related to this attack pattern.

Taxonomy mappings

Mappings to ATT&CK, OWASP and other frameworks.

Related CWE

A Related Weakness relationship associates a weakness with this attack pattern. Each association implies a weakness that must exist for a given attack to be successful.

Visit http://capec.mitre.org/ for more details.

© cvefeed.io
Latest DB Update: Dec. 24, 2024 3:45