CAPEC-321: TCP Sequence Number Probe

Description

This OS fingerprinting probe tests the target system's assignment of TCP sequence numbers. One common way to test TCP Sequence Number generation is to send a probe packet to an open port on the target and then compare the how the Sequence Number generated by the target relates to the Acknowledgement Number in the probe packet. Different operating systems assign Sequence Numbers differently, so a fingerprint of the operating system can be obtained by categorizing the relationship between the acknowledgement number and sequence number as follows: 1) the Sequence Number generated by the target is Zero, 2) the Sequence Number generated by the target is the same as the acknowledgement number in the probe, 3) the Sequence Number generated by the target is the acknowledgement number plus one, or 4) the Sequence Number is any other non-zero number.

Extended Description

During a UDP scan, a datagram is sent to a target port. If an 'ICMP Type 3 Port unreachable' error message is returned then the port is considered closed. Different types of ICMP messages can indicate a filtered port. UDP scanning is slower than TCP scanning. The protocol characteristics of UDP make port scanning inherently more difficult than with TCP, as well as dependent upon ICMP for accurate scanning. Due to ambiguities that can arise between open ports and filtered ports, UDP scanning results often require a high degree of interpretation and further testing to refine. In general, UDP scanning results are less reliable or accurate than TCP-based scanning.

Severity :

Low

Possibility :

Medium

Type :

Detailed

Relationships with other CAPECs

This table shows the other attack patterns and high level categories that are related to this attack pattern.

CAPEC-312: Active OS Fingerprinting Active OS Fingerprinting

Prerequisites

This table shows the other attack patterns and high level categories that are related to this attack pattern.

The ability to monitor and interact with network communications.Access to at least one host, and the privileges to interface with the network interface card.

Skills required

This table shows the other attack patterns and high level categories that are related to this attack pattern.

Taxonomy mappings

Mappings to ATT&CK, OWASP and other frameworks.

Resources required

A tool capable of sending and receiving packets from a remote system.

Related CWE

A Related Weakness relationship associates a weakness with this attack pattern. Each association implies a weakness that must exist for a given attack to be successful.

CWE-200: Exposure of Sensitive Information to an Unauthorized Actor

Visit http://capec.mitre.org/ for more details.