CVE-2026-64513
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
Description
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).
INFO
Published Date :
July 25, 2026, 10:17 a.m.
Last Modified :
July 25, 2026, 10:17 a.m.
Remotely Exploit :
No
Source :
416baaa9-dc9f-4396-8d5f-8c081fb06d67
Affected Products
The following products are affected by CVE-2026-64513
vulnerability.
Even if cvefeed.io is aware of the exact versions of the
products
that
are
affected, the information is not represented in the table below.
No affected product recoded yet
Solution
- Update the Linux kernel to resolve TPR_THRESHOLD computation.
- Apply the specific KVM patch for TPR below threshold optimization.
- Test VM entry stability on affected platforms.
- Verify APICv and virtual-interrupt delivery configurations.
References to Advisories, Solutions, and Tools
Here, you will find a curated list of external links that provide in-depth
information, practical solutions, and valuable tools related to
CVE-2026-64513.
CWE - Common Weakness Enumeration
While CVE identifies
specific instances of vulnerabilities, CWE categorizes the common flaws or
weaknesses that can lead to vulnerabilities. CVE-2026-64513 is
associated with the following CWEs:
Common Attack Pattern Enumeration and Classification (CAPEC)
Common Attack Pattern Enumeration and Classification
(CAPEC)
stores attack patterns, which are descriptions of the common attributes and
approaches employed by adversaries to exploit the CVE-2026-64513
weaknesses.
We scan GitHub repositories to detect new proof-of-concept exploits. Following list is a collection of public exploits and proof-of-concepts, which have been published on GitHub (sorted by the most recently updated).
Results are limited to the first 15 repositories due to potential performance issues.
The following list is the news that have been mention
CVE-2026-64513 vulnerability anywhere in the article.
The following table lists the changes that have been made to the
CVE-2026-64513 vulnerability over time.
Vulnerability history details can be useful for understanding the evolution of a vulnerability, and for identifying the most recent changes that may impact the vulnerability's severity, exploitability, or other characteristics.
-
New CVE Received by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
Jul. 25, 2026
Action Type Old Value New Value Added Affected [{'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': 'eb90f3417a0cc4880e979ccc84e41890d410ea5b', 'lessThan': 'ff9c4c6428883182960cfe5c78928f0896d80ebc', 'versionType': 'git'}, {'status': 'affected', 'version': 'eb90f3417a0cc4880e979ccc84e41890d410ea5b', 'lessThan': '8c8e8ac22ee17d52f9eb2bc814bca7fab90fb8df', 'versionType': 'git'}, {'status': 'affected', 'version': 'eb90f3417a0cc4880e979ccc84e41890d410ea5b', 'lessThan': 'bb365a506b1e6fb050c0fceaad354fe395385ef0', 'versionType': 'git'}], 'programFiles': ['arch/x86/kvm/lapic.c', 'arch/x86/kvm/x86.c'], 'defaultStatus': 'unaffected'}, {'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '4.11'}, {'status': 'unaffected', 'version': '0', 'lessThan': '4.11', 'versionType': 'semver'}, {'status': 'unaffected', 'version': '6.18.39', 'versionType': 'semver', 'lessThanOrEqual': '6.18.*'}, {'status': 'unaffected', 'version': '7.1.4', 'versionType': 'semver', 'lessThanOrEqual': '7.1.*'}, {'status': 'unaffected', 'version': '7.2-rc1', 'versionType': 'original_commit_for_fix', 'lessThanOrEqual': '*'}], 'programFiles': ['arch/x86/kvm/lapic.c', 'arch/x86/kvm/x86.c'], 'defaultStatus': 'affected'}] Added Description In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). Added Reference https://git.kernel.org/stable/c/8c8e8ac22ee17d52f9eb2bc814bca7fab90fb8df Added Reference https://git.kernel.org/stable/c/bb365a506b1e6fb050c0fceaad354fe395385ef0 Added Reference https://git.kernel.org/stable/c/ff9c4c6428883182960cfe5c78928f0896d80ebc