CVE-2026-74274
cxl/region: Fill first free targets[] slot during auto-discovery
Description
In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fill first free targets[] slot during auto-discovery Any invalid endpoint decoder pointer in the target array of an active region is not allowed by cxl driver. This means cxl driver always assumes the first p->nr_targets entries of the target array in an auto-assembly region are valid. However, there are scenarios that could leave NULL endpoint decoder pointer holes in the target array. 1. When cxl_cancel_auto_attach() removes an endpoint decoder from a target array, the target slot is set to NULL. If the removed endpoint decoder is not the last element in the target array, the target array will contain a NULL hole. 2. When a auto-assembly region removes an assigned endpoint decoder, if the removed endpoint decoder is not the last element in the target array, always remains a NULL hole in the target array. When a NULL pointer hole exists in a region's target array, it introduces two potential problems: 1. Access an endpoint decoder via a NULL pointer. it always trigger calltrace like that. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core] Call Trace: <TASK> cxl_region_attach+0xc50/0x2140 [cxl_core] cxl_add_to_region+0x321/0x2330 [cxl_core] discover_region+0x92/0x150 [cxl_port] device_for_each_child+0xf3/0x170 cxl_port_probe+0x150/0x200 [cxl_port] cxl_bus_probe+0x4f/0xa0 [cxl_core] really_probe+0x1c8/0x960 __driver_probe_device+0x323/0x450 driver_probe_device+0x45/0x120 __device_attach_driver+0x15d/0x280 bus_for_each_drv+0x10f/0x190 2. Not having enough valid endpoint decoders attached to an auto-assembly region. if an auto-assembly region is created with lock flag or assigned endpoint decoder with lock flag, which means assigned endpoint decoder will not be reset during detaching, they could re-attach to the auto-assembly region again. But cxl region driver relies on p->nr_targets to verify whether the required number of endpoint decoders has been attached, and NULL endpoint decoder pointers are still counted in that case. To fix above issues, adjust cxl_region_attach_auto() logic to find the first free target slot for endpoint decoder attachment, this ensures NULL holes in the target array are filled, rather than adding new endpoint decoders at the tail of the target array.
INFO
Published Date :
Aug. 15, 2026, 6:22 a.m.
Last Modified :
Aug. 17, 2026, 6:19 a.m.
Remotely Exploit :
No
Source :
416baaa9-dc9f-4396-8d5f-8c081fb06d67
Solution
- Adjust auto-assembly logic to fill the first free target slot.
- Ensure NULL holes are filled during endpoint decoder attachment.
- Validate target array for valid endpoint decoders.
- Apply the resolved Linux kernel patch.
References to Advisories, Solutions, and Tools
Here, you will find a curated list of external links that provide in-depth
information, practical solutions, and valuable tools related to
CVE-2026-74274.
| URL | Resource |
|---|---|
| https://git.kernel.org/stable/c/6fde3fcdfec438ba0df26e25a8ac7c3707211799 | |
| https://git.kernel.org/stable/c/aa8a76711c15041ec1e42c3a74c15c2df0bd31f6 |
CWE - Common Weakness Enumeration
While CVE identifies
specific instances of vulnerabilities, CWE categorizes the common flaws or
weaknesses that can lead to vulnerabilities. CVE-2026-74274 is
associated with the following CWEs:
Common Attack Pattern Enumeration and Classification (CAPEC)
Common Attack Pattern Enumeration and Classification
(CAPEC)
stores attack patterns, which are descriptions of the common attributes and
approaches employed by adversaries to exploit the CVE-2026-74274
weaknesses.
We scan GitHub repositories to detect new proof-of-concept exploits. Following list is a collection of public exploits and proof-of-concepts, which have been published on GitHub (sorted by the most recently updated).
Results are limited to the first 15 repositories due to potential performance issues.
The following list is the news that have been mention
CVE-2026-74274 vulnerability anywhere in the article.
The following table lists the changes that have been made to the
CVE-2026-74274 vulnerability over time.
Vulnerability history details can be useful for understanding the evolution of a vulnerability, and for identifying the most recent changes that may impact the vulnerability's severity, exploitability, or other characteristics.
-
CVE Modified by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
Aug. 17, 2026
Action Type Old Value New Value Changed Affected [{'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '2230c4bdc4120417799c74326ade3123da226d54', 'lessThan': '6fde3fcdfec438ba0df26e25a8ac7c3707211799', 'versionType': 'git'}, {'status': 'affected', 'version': '2230c4bdc4120417799c74326ade3123da226d54', 'lessThan': 'aa8a76711c15041ec1e42c3a74c15c2df0bd31f6', 'versionType': 'git'}], 'programFiles': ['drivers/cxl/core/region.c'], 'defaultStatus': 'unaffected'}, {'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '6.19'}, {'status': 'unaffected', 'version': '0', 'lessThan': '6.19', 'versionType': 'semver'}, {'status': 'unaffected', 'version': '7.1.5', 'versionType': 'semver', 'lessThanOrEqual': '7.1.*'}, {'status': 'unaffected', 'version': '7.2-rc1', 'versionType': 'original_commit_for_fix', 'lessThanOrEqual': '*'}], 'programFiles': ['drivers/cxl/core/region.c'], 'defaultStatus': 'affected'}] [{'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '2230c4bdc4120417799c74326ade3123da226d54', 'lessThan': '6fde3fcdfec438ba0df26e25a8ac7c3707211799', 'versionType': 'git'}, {'status': 'affected', 'version': '2230c4bdc4120417799c74326ade3123da226d54', 'lessThan': 'aa8a76711c15041ec1e42c3a74c15c2df0bd31f6', 'versionType': 'git'}], 'programFiles': ['drivers/cxl/core/region.c'], 'defaultStatus': 'unaffected'}, {'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '6.19'}, {'status': 'unaffected', 'version': '0', 'lessThan': '6.19', 'versionType': 'semver'}, {'status': 'unaffected', 'version': '7.1.5', 'versionType': 'semver', 'lessThanOrEqual': '7.1.*'}, {'status': 'unaffected', 'version': '7.2', 'versionType': 'original_commit_for_fix', 'lessThanOrEqual': '*'}], 'programFiles': ['drivers/cxl/core/region.c'], 'defaultStatus': 'affected'}] -
New CVE Received by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
Aug. 15, 2026
Action Type Old Value New Value Added Affected [{'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '2230c4bdc4120417799c74326ade3123da226d54', 'lessThan': '6fde3fcdfec438ba0df26e25a8ac7c3707211799', 'versionType': 'git'}, {'status': 'affected', 'version': '2230c4bdc4120417799c74326ade3123da226d54', 'lessThan': 'aa8a76711c15041ec1e42c3a74c15c2df0bd31f6', 'versionType': 'git'}], 'programFiles': ['drivers/cxl/core/region.c'], 'defaultStatus': 'unaffected'}, {'repo': 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git', 'vendor': 'Linux', 'product': 'Linux', 'versions': [{'status': 'affected', 'version': '6.19'}, {'status': 'unaffected', 'version': '0', 'lessThan': '6.19', 'versionType': 'semver'}, {'status': 'unaffected', 'version': '7.1.5', 'versionType': 'semver', 'lessThanOrEqual': '7.1.*'}, {'status': 'unaffected', 'version': '7.2-rc1', 'versionType': 'original_commit_for_fix', 'lessThanOrEqual': '*'}], 'programFiles': ['drivers/cxl/core/region.c'], 'defaultStatus': 'affected'}] Added Description In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fill first free targets[] slot during auto-discovery Any invalid endpoint decoder pointer in the target array of an active region is not allowed by cxl driver. This means cxl driver always assumes the first p->nr_targets entries of the target array in an auto-assembly region are valid. However, there are scenarios that could leave NULL endpoint decoder pointer holes in the target array. 1. When cxl_cancel_auto_attach() removes an endpoint decoder from a target array, the target slot is set to NULL. If the removed endpoint decoder is not the last element in the target array, the target array will contain a NULL hole. 2. When a auto-assembly region removes an assigned endpoint decoder, if the removed endpoint decoder is not the last element in the target array, always remains a NULL hole in the target array. When a NULL pointer hole exists in a region's target array, it introduces two potential problems: 1. Access an endpoint decoder via a NULL pointer. it always trigger calltrace like that. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core] Call Trace: <TASK> cxl_region_attach+0xc50/0x2140 [cxl_core] cxl_add_to_region+0x321/0x2330 [cxl_core] discover_region+0x92/0x150 [cxl_port] device_for_each_child+0xf3/0x170 cxl_port_probe+0x150/0x200 [cxl_port] cxl_bus_probe+0x4f/0xa0 [cxl_core] really_probe+0x1c8/0x960 __driver_probe_device+0x323/0x450 driver_probe_device+0x45/0x120 __device_attach_driver+0x15d/0x280 bus_for_each_drv+0x10f/0x190 2. Not having enough valid endpoint decoders attached to an auto-assembly region. if an auto-assembly region is created with lock flag or assigned endpoint decoder with lock flag, which means assigned endpoint decoder will not be reset during detaching, they could re-attach to the auto-assembly region again. But cxl region driver relies on p->nr_targets to verify whether the required number of endpoint decoders has been attached, and NULL endpoint decoder pointers are still counted in that case. To fix above issues, adjust cxl_region_attach_auto() logic to find the first free target slot for endpoint decoder attachment, this ensures NULL holes in the target array are filled, rather than adding new endpoint decoders at the tail of the target array. Added Reference https://git.kernel.org/stable/c/6fde3fcdfec438ba0df26e25a8ac7c3707211799 Added Reference https://git.kernel.org/stable/c/aa8a76711c15041ec1e42c3a74c15c2df0bd31f6