3.5
LOW CVSS 3.1
CVE-2026-93670
Out-of-bounds write in the DesignWare I3C driver when the device address table is full
Description

The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.

INFO

Published Date :

Nov. 16, 2026, 10:18 p.m.

Last Modified :

Nov. 16, 2026, 10:18 p.m.

Remotely Exploit :

No
Affected Products

The following products are affected by CVE-2026-93670 vulnerability. Even if cvefeed.io is aware of the exact versions of the products that are affected, the information is not represented in the table below.

ID Vendor Product Action
1 Zephyrproject zephyr
2 Zephyrproject zephyr
CVSS Scores
The Common Vulnerability Scoring System is a standardized framework for assessing the severity of vulnerabilities in software and systems. We collect and displays CVSS scores from various sources for each CVE.
Score Version Severity Vector Exploitability Score Impact Score Source
CVSS 3.1 LOW e2e69745-5e70-4e92-8431-deb5529a81ad
CVSS 3.1 LOW MITRE-CVE
CVSS 3.1 LOW [email protected]
Solution
Fix integer overflow in DAT slot tracking and validate array bounds before memory access.
  • Correct get_free_pos() return type and sentinel value.
  • Validate array indices against bounds before memory access.
  • Ensure DAT size matches software array size.
  • Apply vendor-supplied patches for the driver.
References to Advisories, Solutions, and Tools

Here, you will find a curated list of external links that provide in-depth information, practical solutions, and valuable tools related to CVE-2026-93670.

URL Resource
https://github.com/zephyrproject-rtos/zephyr/commit/1df24c85842da26b24c14b7cfcd51928a86b5530
https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-5jhj-95j8-x5gf
CWE - Common Weakness Enumeration

While CVE identifies specific instances of vulnerabilities, CWE categorizes the common flaws or weaknesses that can lead to vulnerabilities. CVE-2026-93670 is associated with the following CWEs:

Common Attack Pattern Enumeration and Classification (CAPEC)

Common Attack Pattern Enumeration and Classification (CAPEC) stores attack patterns, which are descriptions of the common attributes and approaches employed by adversaries to exploit the CVE-2026-93670 weaknesses.

We scan GitHub repositories to detect new proof-of-concept exploits. Following list is a collection of public exploits and proof-of-concepts, which have been published on GitHub (sorted by the most recently updated).

Results are limited to the first 15 repositories due to potential performance issues.

The following list is the news that have been mention CVE-2026-93670 vulnerability anywhere in the article.

The following table lists the changes that have been made to the CVE-2026-93670 vulnerability over time.

Vulnerability history details can be useful for understanding the evolution of a vulnerability, and for identifying the most recent changes that may impact the vulnerability's severity, exploitability, or other characteristics.

  • New CVE Received by [email protected]

    Nov. 16, 2026

    Action Type Old Value New Value
    Added Description The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
    Added CVSS V3.1 AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:L
    Added CWE CWE-787
    Added Affected New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/93xxx/CVE-2026-93670.json">CVE-2026-93670</a>
    Added Reference https://github.com/zephyrproject-rtos/zephyr/commit/1df24c85842da26b24c14b7cfcd51928a86b5530
    Added Reference https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-5jhj-95j8-x5gf
EPSS is a daily estimate of the probability of exploitation activity being observed over the next 30 days. Following chart shows the EPSS score history of the vulnerability.