CVE-2026-95826
Out-of-bounds write in the SMSC911x Ethernet driver when transmitting frames larger than the staging buffer
Description
The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed it directly to net_pkt_read(pkt, tx_buf, total_len), with no comparison against the size of tx_buf (NET_ETH_MAX_FRAME_SIZE). net_pkt_read() takes no destination size and only fails when the packet is shorter than the requested length, so any packet longer than the staging buffer was copied past its end. Nothing between the IP layer and the driver bounds the frame to what the link can carry: ethernet_send() in subsys/net/l2/ethernet/ethernet.c performs no length check, and the IPv6 output path only compares the packet against the interface MTU when CONFIG_NET_IPV6_FRAGMENT is enabled (it is disabled by default). The size the stack will build is therefore governed by the interface MTU, and that MTU is remotely settable: handle_ra_input() in subsys/net/ip/ipv6_nbr.c honours the MTU option of any Router Advertisement with a value up to 0xffff, gated only by the standard hop-limit-255 and link-local-source checks. An unauthenticated attacker on the same link can raise the MTU and then have the device emit a single frame of several kilobytes, for example as a TCP segment from any service that returns more than ~1.5 KB or as an oversized UDP datagram. The result is an out-of-bounds write into .bss immediately after tx_buf, with the overrun length and much of its content derived from the transmitted frame. Consequences range from corruption of adjacent kernel data and a crash to potential control-flow influence where the clobbered globals hold pointers; the practical overrun size is bounded by the network buffer pool rather than by the advertised MTU. The fix rejects frames larger than NET_ETH_MAX_FRAME_SIZE with -EMSGSIZE before any TX_DATA_PORT write, so the controller FIFO is also not left holding a command word without its payload.
INFO
Published Date :
Nov. 20, 2026, 6:18 p.m.
Last Modified :
Nov. 20, 2026, 7:18 p.m.
Remotely Exploit :
No
Source :
[email protected]
Affected Products
The following products are affected by CVE-2026-95826
vulnerability.
Even if cvefeed.io is aware of the exact versions of the
products
that
are
affected, the information is not represented in the table below.
CVSS Scores
| Score | Version | Severity | Vector | Exploitability Score | Impact Score | Source |
|---|---|---|---|---|---|---|
| CVSS | 134c704f-9b21-4f2e-91b3-4a467353bcc0 | |||||
| CVSS 3.1 | HIGH | e2e69745-5e70-4e92-8431-deb5529a81ad | ||||
| CVSS 3.1 | HIGH | MITRE-CVE | ||||
| CVSS 3.1 | HIGH | [email protected] |
Solution
- Reject frames larger than the maximum buffer size.
- Ensure driver handles packet lengths correctly.
- Validate MTU settings from external sources.
- Apply provided patches to update the driver.
References to Advisories, Solutions, and Tools
Here, you will find a curated list of external links that provide in-depth
information, practical solutions, and valuable tools related to
CVE-2026-95826.
| URL | Resource |
|---|---|
| https://github.com/zephyrproject-rtos/zephyr/commit/84de8990c30b13f713ec4913684d214ba85e33d0 | |
| https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-r2gv-c3q9-4fmj |
CWE - Common Weakness Enumeration
While CVE identifies
specific instances of vulnerabilities, CWE categorizes the common flaws or
weaknesses that can lead to vulnerabilities. CVE-2026-95826 is
associated with the following CWEs:
Common Attack Pattern Enumeration and Classification (CAPEC)
Common Attack Pattern Enumeration and Classification
(CAPEC)
stores attack patterns, which are descriptions of the common attributes and
approaches employed by adversaries to exploit the CVE-2026-95826
weaknesses.
We scan GitHub repositories to detect new proof-of-concept exploits. Following list is a collection of public exploits and proof-of-concepts, which have been published on GitHub (sorted by the most recently updated).
Results are limited to the first 15 repositories due to potential performance issues.
The following list is the news that have been mention
CVE-2026-95826 vulnerability anywhere in the article.
The following table lists the changes that have been made to the
CVE-2026-95826 vulnerability over time.
Vulnerability history details can be useful for understanding the evolution of a vulnerability, and for identifying the most recent changes that may impact the vulnerability's severity, exploitability, or other characteristics.
-
CVE Modified by 134c704f-9b21-4f2e-91b3-4a467353bcc0
Nov. 20, 2026
Action Type Old Value New Value Added SSVC {'id': 'CVE-2026-95826', 'role': 'CISA Coordinator', 'options': [{'exploitation': 'none'}, {'automatable': 'no'}, {'technicalImpact': 'total'}], 'version': '2.0.3', 'timestamp': '2026-11-20T18:29:26.104650Z'} -
New CVE Received by [email protected]
Nov. 20, 2026
Action Type Old Value New Value Added Description The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed it directly to net_pkt_read(pkt, tx_buf, total_len), with no comparison against the size of tx_buf (NET_ETH_MAX_FRAME_SIZE). net_pkt_read() takes no destination size and only fails when the packet is shorter than the requested length, so any packet longer than the staging buffer was copied past its end. Nothing between the IP layer and the driver bounds the frame to what the link can carry: ethernet_send() in subsys/net/l2/ethernet/ethernet.c performs no length check, and the IPv6 output path only compares the packet against the interface MTU when CONFIG_NET_IPV6_FRAGMENT is enabled (it is disabled by default). The size the stack will build is therefore governed by the interface MTU, and that MTU is remotely settable: handle_ra_input() in subsys/net/ip/ipv6_nbr.c honours the MTU option of any Router Advertisement with a value up to 0xffff, gated only by the standard hop-limit-255 and link-local-source checks. An unauthenticated attacker on the same link can raise the MTU and then have the device emit a single frame of several kilobytes, for example as a TCP segment from any service that returns more than ~1.5 KB or as an oversized UDP datagram. The result is an out-of-bounds write into .bss immediately after tx_buf, with the overrun length and much of its content derived from the transmitted frame. Consequences range from corruption of adjacent kernel data and a crash to potential control-flow influence where the clobbered globals hold pointers; the practical overrun size is bounded by the network buffer pool rather than by the advertised MTU. The fix rejects frames larger than NET_ETH_MAX_FRAME_SIZE with -EMSGSIZE before any TX_DATA_PORT write, so the controller FIFO is also not left holding a command word without its payload. Added CVSS V3.1 AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H Added CWE CWE-787 Added Affected New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/95xxx/CVE-2026-95826.json">CVE-2026-95826</a> Added Reference https://github.com/zephyrproject-rtos/zephyr/commit/84de8990c30b13f713ec4913684d214ba85e33d0 Added Reference https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-r2gv-c3q9-4fmj