CVE-2026-99447
spi: spi-pci1xxxx: quiesce DMA engines on transfer timeout
Description
In the Linux kernel, the following vulnerability has been resolved: spi: spi-pci1xxxx: quiesce DMA engines on transfer timeout If a DMA-mapped transfer times out waiting for DMA_TERM and neither DMA abort interrupt arrived, pci1xxxx_spi_transfer_with_dma() returns through the error label while both DMA engines are still enabled, the done/abort interrupt status is still armed and the transfer state (p->xfer, p->tx_sgl, p->rx_sgl) is still registered. The ISRs keep firing afterwards: they reprogram the DMA engines from p->tx_sgl / p->rx_sgl and signal completion through p->xfer and p->spi_xfer_done, all of which the SPI core is free to unmap or reuse once transfer_one() has returned, which is a use-after-free. A late done interrupt can also start the next transfer queued behind the failed one. Stop both DMA engines, drain the pending done/abort interrupt status and synchronize the DMA IRQs before dropping the in-progress state and the transfer pointers, and re-enable the engines afterwards so that subsequent transfers keep working. The engines are only turned back on once both were confirmed to have stopped: re-enabling an engine that failed to stop would cancel the pending stop request and let it keep running into buffers the SPI core is about to unmap or free, which is exactly the window this patch closes. An engine that failed to stop is left disabled, as the abort paths already do. The DMA interrupt status and mask registers are shared between the two SPI instances, so the cleanup drains only this instance's done/abort status bits instead of masking the interrupt lines, which would also suppress the peer instance's completion interrupts. Also make the DMA ISRs ignore interrupts while no transfer is in progress so that a stray MSI after the cleanup can no longer act on the cleared state. No PCI1XXXX hardware was available for testing and QEMU has no model of this PCIe part, so the timeout path was exercised with a userspace replica of the timeout branch and the DMA ISRs, with the register and interrupt accesses mocked: on the unfixed code both a wedged engine that clears after the timeout and a late done interrupt touch the freed transfer state, while with this fix applied neither does and an engine that failed to stop is left disabled. The module was also loaded and unloaded in a QEMU x86_64 guest running a kernel with this fix applied.
INFO
Published Date :
Nov. 19, 2026, 3:17 p.m.
Last Modified :
Nov. 19, 2026, 3:17 p.m.
Remotely Exploit :
No
Source :
416baaa9-dc9f-4396-8d5f-8c081fb06d67
Solution
- Apply the vendor patch to resolve the DMA transfer timeout.
- Stop DMA engines on timeout.
- Drain pending interrupts before releasing transfer state.
- Re-enable DMA engines after ensuring they stopped.
References to Advisories, Solutions, and Tools
Here, you will find a curated list of external links that provide in-depth
information, practical solutions, and valuable tools related to
CVE-2026-99447.
CWE - Common Weakness Enumeration
While CVE identifies
specific instances of vulnerabilities, CWE categorizes the common flaws or
weaknesses that can lead to vulnerabilities. CVE-2026-99447 is
associated with the following CWEs:
Common Attack Pattern Enumeration and Classification (CAPEC)
Common Attack Pattern Enumeration and Classification
(CAPEC)
stores attack patterns, which are descriptions of the common attributes and
approaches employed by adversaries to exploit the CVE-2026-99447
weaknesses.
We scan GitHub repositories to detect new proof-of-concept exploits. Following list is a collection of public exploits and proof-of-concepts, which have been published on GitHub (sorted by the most recently updated).
Results are limited to the first 15 repositories due to potential performance issues.
The following list is the news that have been mention
CVE-2026-99447 vulnerability anywhere in the article.
The following table lists the changes that have been made to the
CVE-2026-99447 vulnerability over time.
Vulnerability history details can be useful for understanding the evolution of a vulnerability, and for identifying the most recent changes that may impact the vulnerability's severity, exploitability, or other characteristics.
-
New CVE Received by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
Nov. 19, 2026
Action Type Old Value New Value Added Description In the Linux kernel, the following vulnerability has been resolved: spi: spi-pci1xxxx: quiesce DMA engines on transfer timeout If a DMA-mapped transfer times out waiting for DMA_TERM and neither DMA abort interrupt arrived, pci1xxxx_spi_transfer_with_dma() returns through the error label while both DMA engines are still enabled, the done/abort interrupt status is still armed and the transfer state (p->xfer, p->tx_sgl, p->rx_sgl) is still registered. The ISRs keep firing afterwards: they reprogram the DMA engines from p->tx_sgl / p->rx_sgl and signal completion through p->xfer and p->spi_xfer_done, all of which the SPI core is free to unmap or reuse once transfer_one() has returned, which is a use-after-free. A late done interrupt can also start the next transfer queued behind the failed one. Stop both DMA engines, drain the pending done/abort interrupt status and synchronize the DMA IRQs before dropping the in-progress state and the transfer pointers, and re-enable the engines afterwards so that subsequent transfers keep working. The engines are only turned back on once both were confirmed to have stopped: re-enabling an engine that failed to stop would cancel the pending stop request and let it keep running into buffers the SPI core is about to unmap or free, which is exactly the window this patch closes. An engine that failed to stop is left disabled, as the abort paths already do. The DMA interrupt status and mask registers are shared between the two SPI instances, so the cleanup drains only this instance's done/abort status bits instead of masking the interrupt lines, which would also suppress the peer instance's completion interrupts. Also make the DMA ISRs ignore interrupts while no transfer is in progress so that a stray MSI after the cleanup can no longer act on the cleared state. No PCI1XXXX hardware was available for testing and QEMU has no model of this PCIe part, so the timeout path was exercised with a userspace replica of the timeout branch and the DMA ISRs, with the register and interrupt accesses mocked: on the unfixed code both a wedged engine that clears after the timeout and a late done interrupt touch the freed transfer state, while with this fix applied neither does and an engine that failed to stop is left disabled. The module was also loaded and unloaded in a QEMU x86_64 guest running a kernel with this fix applied. Added Affected New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99447.json">CVE-2026-99447</a> Added Reference https://git.kernel.org/stable/c/0b591332a2bdc13d3f9163793131fe3651d1556a Added Reference https://git.kernel.org/stable/c/733552f8c5f5fdce6b2a135dfa2a05ead9f66e91 Added Reference https://git.kernel.org/stable/c/d858330e288a7818cf6d52ed1bd62153f4cd35c0